Regulatory set

The certifications EMAX (and its group facilities) actually hold.

Four certificates with cert numbers, issuers, and validity windows below — every figure transcribed from current paperwork, not marketing rounding. ASME and UL are integrated at component level on request; we do not claim a system-level cert for either.

Cert No.: M.2026.206.C134347
Issuer: UDEM (Türkiye) Notified Body
Issued: 28 Jan 2026
Valid: 27 Jan 2031
Holder: EMAX Power (Shanghai) Co., Ltd. (direct)

Download PDF

CE Machinery + EMC Directive

Screw range — TSC-3 to TSC-250, including the flagship TSC-100PV.

EMAX Power (Shanghai) is CE certified under the Machinery Directive (2006/42/EC) and EMC Directive (2014/30/EU). Our screw compressor range — TSC-3 to TSC-250 including the flagship TSC-100PV — is covered under certificate M.2026.206.C134347 issued by UDEM (Türkiye), valid through January 2031.

Other product lines (piston, scroll, accessories) are certified per configuration; documentation on request via [email protected].

Coverage: Single-phase + three-phase screw compressors, TSC-3 → TSC-250
Directives: 2006/42/EC (Machinery) · 2014/30/EU (EMC)
Harmonised standards: EN ISO 12100 · EN 60204-1 · EN 60335 · EN 61000-6-3 · EN 1012-2

AS1210

Cert No.: WSV-0151631380
Issuer: WorkSafe Victoria
Issued: 13 Mar 2026
Holder: NMS Machinery (Shanghai) Co., Ltd. — group facility

Download PDF

Australian Standard 1210 — Pressure Vessels

300L · 11 bar receiver design registered with WorkSafe Victoria.

Pressure vessels for the Australia / New Zealand market comply with AS 1210. Our 300L 11 bar receiver design is registered with WorkSafe Victoria (WSV-0151631380) via group facility NMS Machinery (Shanghai).

Additional pressure vessel designs available per project; registration certificates on request.

Coverage: 300L 11 bar pressure vessel · 1.1 MPa · hazard class C
Directives: AS 1210 - 2010 Amd 2:2015
Harmonised standards: AS 1210 design registration

ISO 9001

Cert No.: 03825Q011709R4S
Issuer: WSF (China · IAF MLA member)
Issued: Re-issued 02 Dec 2025
Valid: 03 Jan 2029
Holder: Group production facility

Download PDF

ISO 9001:2015 Quality Management

Reciprocating piston production at our group facility.

Our reciprocating piston compressor production at our group facility is certified to ISO 9001:2015 quality management (cert no. 03825Q011709R4S, valid through January 2029).

Other product lines are manufactured at facilities operating equivalent QMS standards.

Coverage: Reciprocating piston compressor production
Directives: ISO 9001:2015

ISO 13485

Cert No.: W25QY0441R0S
Issuer: WSF
Issued: 29 Sep 2025
Valid: 28 Sep 2028
Holder: Group medical-device facility

Download PDF

ISO 13485:2016 Medical Device QMS

Dental oil-free compressors, dental suction machines, medical washers.

Our dental and medical product line — oil-free dental compressors, dental suction machines, and medical washers — is manufactured under ISO 13485:2016 medical device quality management at our group medical facility (cert no. W25QY0441R0S, valid through September 2028).

This certification applies to the medical product line only.

Coverage: Dental oil-free compressors · dental suction machines · medical washers
Directives: ISO 13485:2016

Why it matters

Without AS1210, that installation isn't legal.

Procurement officers who know their local compliance regime reject uncertified imports before they're even unpacked. AS1210 is the check-box that gets your container through the door.

Food processing

Dairy, meat, beverage, and bakery operations in Australia require AS1210-certified vessels across any compressed-air system that touches product air.

Mining & construction

Worksite compressors operating on Australian and New Zealand sites sit within the same pressure-equipment regime as fixed plant.

Hospitals & medical

Health-authority procurement frameworks in AU/NZ routinely reference AS1210 as minimum criteria.

Equipment manufacturers

If you sell a larger machine that contains a compressor, AS1210 is the component certification that lets the whole assembly pass a local inspection.

What's covered

Scope of our current AS1210 certification

Rotary screw compressor pressure vessels (all cabinet variants)
Oil separator receivers on cabinet-screw units
Combined 4-in-1 and 2-in-1 tank-mounted packages
High-pressure compressor vessels up to 40 bar
Design verification, manufacturer identification, and hydrostatic test records supplied with every unit
Recertification documentation available for ongoing end-user audits

Component-level integration

ASME & UL — available per project, not claimed system-wide.

ASME

Component-level

ASME-Compliant Components

Components for ASME-compliant pressure equipment are available per configuration. EMAX works with ASME-certified component suppliers for projects requiring ASME compliance. Specific documentation on request.

Component-level

UL-Recognised Components

UL-recognised electrical components are available for the North American market. UL-listed configurations on request via [email protected].

Need the certificate bundle for your jurisdiction?

Tell us the destination market and product line — we'll return the PDFs, certificate numbers, and any per-project documentation you need within two business days.

Request compliance pack Back to About