Shanghai Air Compressor Exporter
EMAX POWER has exported air compressors from Shanghai since 2001 and has delivered more than 100,000 machines to distributors in 30+ countries, with the certificates they need to clear customs and inspection.
EMAX began in Shanghai in 2001, and EMAX POWER (Shanghai) Co., Ltd. was incorporated in 2009 to bring engineering, quality and service into one company. The engineering traces to founder Frank Sun, whose career in compressed air began in 1986.
The range is built for export from the first drawing: container loading planned per model, and certificates chosen for the markets distributors sell into. More than 2 million compressor components have been delivered alongside the machines, to an installed base on six continents.
What ships from Shanghai
Every family below, broken out by type, from one point of contact: a distributor stocking several deals with one team and one set of export documents.
Rotary Screw
PM VSD cabinet screws from 5.5 to 100 HP, fixed-speed from 7.5 to 250 HP, and combined 2-in-1 and 4-in-1 units from 3 to 20 HP.
High-Pressure Screw
TSC-PV two-stage PM VSD screws for 18 to 30 bar, from 15 to 480 HP, built for PET bottle-blowing lines.
Portable Screw
Petrol and diesel engine-driven screws from 35 to 185 CFM, for job sites with no grid power.
Piston
Oil-lubricated belt-driven units from 3 to 10 HP at up to 15 bar, oil-free piston from 0.8 to 22 kW, and petrol engine-driven models.
Pump Heads
Bare LB cast-iron heads from 3 to 10 HP for machine builders and system integrators; OL oil-free heads are listed under Piston.
Scroll
TSLO oil-free 2-in-1 and 4-in-1 scroll from 3 to 20 HP with ISO 8573-1 Class 0, and oil-injected scroll from 3 to 10 HP.
Oil-Free
No oil in the air path: oil-free piston and scroll, water-lubricated screw from 10 to 75 HP, and dry two-stage screw from 60 to 422 HP.
Special Solutions
PET two-stage compressors for 30 to 40 bar, WH air boosters to 40 bar, O2 oxygen boosters to 200 bar(g), and the patent-protected TT 4-in-1 mobile power station.
Air Treatment
ADH refrigerated dryers from 0.5 to 165 m³/min, ADH-H dryers for 20 to 40 bar, SXD and SPD desiccant dryers to −20 °C pressure dew point, and line filters to 40 bar.
Built for export
AS1210 air receivers
The pressure-vessel approval required across regulated Australian and New Zealand sectors, and paperwork most Chinese-built compressors cannot supply.
Container-planned logistics
20GP and 40HQ loading, MOQ and lead time are quoted per model, so a shipping schedule can be built around them.
Checked before it ships
Engineering supervision and pre-shipment QC on every export, whichever family is in the container.
About EMAX POWER exports
- Where is EMAX POWER based?
- In Shanghai, China. EMAX has supplied distributors from Shanghai since 2001.
- What certifications does EMAX hold?
- EMAX holds AS1210 pressure-vessel approval for its air receivers. The screw range carries a CE declaration of conformity under the EU Machinery and EMC Directives, and other lines are CE-marked per configuration. ISO 9001 and ISO 13485 certify the management systems at the group facilities. ASME and UL apply at component level, on request.
- What are typical lead times and minimum order quantities?
- Both depend on the family and configuration. Container loading is planned per model; share your target market and volume through the contact form and the team will quote MOQ and lead time.
- Which markets does EMAX export to?
- Distributors in 30+ countries on six continents. Documents are matched to the destination, such as AS1210 for Australia and New Zealand or CE for Europe, and the team confirms what your market requires before an order is placed.
Talk to the team that builds it.
Share your market, the families you have in mind, and your volume. You will reach the people who make the equipment, not a call centre.